top of page

Winter-Proof Your Home: When to Call a Heating Engineer (and What to Ask)

2 hours ago
6 min read
Image Source: Unsplash
Image Source: Unsplash

It's never pleasant to realise your heating isn't working when it gets cold, whether that's the bedrooms failing to warm up, no hot water, etc.

There are some basic diagnostics you can perform, but importantly, know when you should not investigate further and get an engineer to look at it. The sections below explain how to identify an appropriate heating engineer and some questions to ask them.

Heating accounts for a significant proportion of overall energy usage - 60.8% of domestic energy used in UK homes in 2025, according to the Government's latest 2026 statistics publication, was to heat living spaces.

This article covers:

  • Basic Diagnostics

  • Identifying an appropriate Heating Engineer

  • When to urgently contact an Engineer

  • What to ask your heating engineer

  • Information to gather on engineer visit

  • Mitigating risk of other issues over Winter

  • Summary

Basic Diagnostics

Perform all of the following that are within your heating system's user documentation, to diagnose why you have lost heating / hot water:

  • Ensure the thermostat/timer hasn't been altered, is requesting heating, or is on 'holiday' mode

  • Check that none of the radiator isolation valves are turned fully off

  • . Review the boiler for any error codes, and review the current pressure vs manufacturer guidance. Don't continue to bleed/ re-pressurise if you find that the pressure regularly decreases

  • If the top of a radiator isn't reaching temperature, consider bleeding the radiator if you know how to safely do this, ensuring the system is isolated/ cool, and per the heating manufacturer's instructions

If you complete all of these and still don't have heating, make a note of what you have done, which can be useful for the engineer, but don't continue to dismantle your system.

Identifying an appropriate Heating Engineer

Your type of heating appliance will require a different level of expertise, e.g. specialist in gas boilers, ASHP, oil, etc.

Use the website myjobquote.co.uk/heating-engineer to obtain quotes from engineers, detailing the type of heating appliance, what isn't working, and if you've lost heating, HW, or both. This will then allow you to fairly compare quotes received.

Ensure that, for any gas appliance, the engineer is registered on the Gas Safe Register and has the relevant competencies on their Gas Safe card, which you can cross-check against the Register when they arrive (don't rely on a registered business name alone).

Similarly, ask about the engineer's knowledge/experience on ASHPs, or legacy boiler models, to ensure that the engineer is best placed to resolve your issue.

When to urgently contact an Engineer

Depending on the circumstances, you may wish to contact an engineer on a routine basis, or more urgently, e.g.

  • boiler frequently shutting down, recurring drop in boiler pressure, leak, loss of heating in cold conditions, etc

Ensure you maintain a safe distance from any parts of the heating that have come into contact with water, and advise the engineer if you have anyone vulnerable living in the property, to prompt urgency of attendance.

If you suspect a gas leak, you should leave the affected building, avoid flames and electrical switches, ventilate if safe, and call 0800 111 999 from safety. Arrange repairs after the emergency is managed; do not use the suspect appliance until checked by a Gas Safe registered engineer.

CO is an odourless byproduct of combustion, and therefore particularly insidious, and your CO alarm is intended to alert you to CO; it has no smell, and everyone should move into fresh air immediately if the alarm sounds, then seek urgent safety advice, along with any symptoms, e.g. headache, light-headedness, feeling ill, that alleviate upon leaving the affected area, which you should not re-enter until you have obtained appropriate guidance.

Call NHS on 111 if you believe that you have been exposed to carbon monoxide, or if you think you have symptoms of carbon monoxide poisoning, or 999 if anyone in your household experiences any severe symptoms, such as difficulty breathing, confusion, loss of power, chest pains, collapse, etc., and/or if you suspect a gas appliance is leaking carbon monoxide, followed by the instruction to call 0800 111 999 immediately, call the National Emergency gas service, 0800 111 999, as well. Do not attempt to remove or tamper with the casing, or any internal gas-related component, of any of your gas appliances, even if operating normally, if there are indications that something may not be correct.

What to ask your heating engineer

Consider asking the following questions when obtaining quotes, to understand the service on offer, and ensure transparency, prior to committing to a booking:

  • Confirm qualifications, e.g., for gas, confirm Gas Safe registration, and relevant competencies or knowledge on your ASHP, etc., depending on the type of system

  • Confirm whether there is any call-out fee, i.e. covering travel, inspection, etc., and if payable regardless of proceeding with the repair

  • What does the quoted amount cover, e.g. parts, call-out, VAT, testing, clearance, etc., and if any items are not included, obtain written confirmation

  • If any works are identified to be required, outside of the initial works quoted, how will you agree these and proceed

  • Can you confirm a summary/documentation of works undertaken, to aid ongoing maintenance

You will also want to enquire as to the expected date/time of the engineer, and whether the likely parts will be on the vehicle, although the fault may not be identifiable without the engineer attending, so it may not be fixed on the day.

As such, when comparing multiple quotes, you will want to understand precisely what is being offered, as some may be inspection only, or include additional work, etc., meaning that the cheapest quote is not necessarily the best value for you.

Information to gather on engineer visit

The engineer will likely ask you when you first noticed the fault, if it occurs daily, etc., to assist with diagnosis, so it's worth having your observations, photos, etc. ready for reference.

Depending on whether you have asked for a service, fault-finding, and/or repair on your gas appliance, the engineer will be required to undertake varying degrees of work, and be mindful that a standard service will differ from a landlord's legally required annual gas safety check, per HSE, and you should consider scheduling periodic servicing, at least yearly, via a Gas Safe registered engineer, in line with HSE guidance.

If the appliance is let by your landlord, you should raise the matter with them, who will then have obligations to undertake any checks/works, and you should not appoint engineers to remediate any of your landlord's assets, unless authorised by the landlord/ agent.

On an ASHP, the engineer will likely investigate various components, e.g. controls, filter, internal/outside pressures, whether radiators are reaching flow temperatures, etc., to ascertain if a fault exists, or whether any radiators may require balancing, or if heating settings need to be raised, to improve room temperatures.

Finally, request any observations, actions taken, and any outstanding works from the engineer prior to them leaving, and, if necessary, obtain reasons for why works cannot be completed, e.g. awaiting parts, etc.

Mitigating risk of other issues over Winter

Beyond rectifying the heating, you can also perform some basic checks to prevent similar, or other, faults over the colder months:

  • Test the heating sufficiently in advance, prior to freezing conditions, and ensure that all areas of the dwelling are achieving acceptable temperatures, avoiding any obstructions (e.g., furniture, drapes) in front of radiators, and inspect for any obvious seepage from, e.g., radiator, pipework, valve, connections, etc., that you can safely access, without applying force/manipulation

  • Maintain copies of any heating service records, and refer to the ASHP, or relevant manufacturer guidance, for periodic inspections/servicing, as applicable, for the life of the equipment

  • Check the battery and, if applicable, test the CO alarm, in accordance with the manufacturer, understanding that this is an adjunct control, and that the heating should be installed, operated, maintained, and ventilated appropriately, in the first instance

  • If you continue to observe a decrease in boiler pressure, following repressurising, or any other recurring symptom, arrange a visit to investigate, rather than simply repeating the action, to address the root cause.

Summary

With this, you should have sufficient information to identify issues and, importantly, when not to continue, with diagnosing and resolving heating faults, and engage the right heating engineer, whilst understanding what to ask, and information to take, from their visit, to avoid further, unnecessary, issues over the winter.


Comments


INTERVIEWS
RECENT POSTS

© 2023 by New Wave Magazine. Proudly created by New Wave Studios

bottom of page